/* Optimized strnlen implementation for PowerPC64/POWER7 using cmpb insn.
   Copyright (C) 2010-2013 Free Software Foundation, Inc.
   Contributed by Luis Machado <luisgpm@br.ibm.com>.
   This file is part of the GNU C Library.

   The GNU C Library is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.

   The GNU C Library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   Lesser General Public License for more details.

   You should have received a copy of the GNU Lesser General Public
   License along with the GNU C Library; if not, see
   <http://www.gnu.org/licenses/>.  */

#include <sysdep.h>

/* int [r3] strnlen (char *s [r3], int size [r4])  */
	.machine  power7
ENTRY (__strnlen)
	CALL_MCOUNT 2
	dcbt	0,r3
	clrrdi  r8,r3,3
	add	r7,r3,r4      /* Calculate the last acceptable address.  */
	cmpldi	r4,32
	li	r0,0	      /* Doubleword with null chars.  */
	/* If we have less than 33 bytes to search, skip to a faster code.  */
	ble	L(small_range)

	cmpld	cr7,r3,r7    /* Is the address equal or less than r3?  If
				it's equal or less, it means size is either 0
				or a negative number.  */
	ble	cr7,L(proceed)

	li	r7,-1	      /* Make r11 the biggest if r4 <= 0.  */
L(proceed):
	rlwinm	r6,r3,3,26,28 /* Calculate padding.  */
	ld	r12,0(r8)     /* Load doubleword from memory.  */
	cmpb	r10,r12,r0    /* Check for null bytes in DWORD1.  */
	sld	r10,r10,r6
	srd	r10,r10,r6
	cmpldi	cr7,r10,0     /* If r10 == 0, no null's have been found.  */
	bne	cr7,L(done)

	/* Are we done already?  */
	addi	r9,r8,8
	cmpld	cr6,r9,r7
	bge	cr6,L(end_max)

	mtcrf   0x01,r8
	/* Are we now aligned to a quadword boundary?  If so, skip to
	   the main loop.  Otherwise, go through the alignment code.  */

	bt	28,L(loop_setup)

	/* Handle DWORD2 of pair.  */
	ldu	r12,8(r8)
	cmpb	r10,r12,r0
	cmpldi	cr7,r10,0
	bne	cr7,L(done)

	/* Are we done already?  */
	addi	r9,r8,8
	cmpld	cr6,r9,r7
	bge	cr6,L(end_max)

L(loop_setup):
	sub	r5,r7,r9
	srdi	r6,r5,4	      /* Number of loop iterations.  */
	mtctr	r6	      /* Setup the counter.  */
	b	L(loop)
	/* Main loop to look for the null byte backwards in the string.  Since
	   it's a small loop (< 8 instructions), align it to 32-bytes.  */
	.p2align  5
L(loop):
	/* Load two doublewords, compare and merge in a
	   single register for speed.  This is an attempt
	   to speed up the null-checking process for bigger strings.  */

	ld	r12,8(r8)
	ldu	r11,16(r8)
	cmpb	r10,r12,r0
	cmpb	r9,r11,r0
	or	r5,r9,r10     /* Merge everything in one doubleword.  */
	cmpldi	cr7,r5,0
	bne	cr7,L(found)
	bdnz	L(loop)
	/* We're here because the counter reached 0, and that means we
	   didn't have any matches for null in the whole range.  Just return
	   the original size.  */
	addi	r9,r8,8
	cmpld	cr6,r9,r7
	blt	cr6,L(loop_small)

L(end_max):
	sub	r3,r7,r3
	blr

	/* OK, one (or both) of the doublewords contains a null byte.  Check
	   the first doubleword and decrement the address in case the first
	   doubleword really contains a null byte.  */
	.align	4
L(found):
	cmpldi	cr6,r10,0
	addi	r8,r8,-8
	bne	cr6,L(done)

	/* The null byte must be in the second doubleword.  Adjust the address
	   again and move the result of cmpb to r10 so we can calculate the
	   length.  */

	mr	r10,r9
	addi	r8,r8,8

	/* r10 has the output of the cmpb instruction, that is, it contains
	   0xff in the same position as the null byte in the original
	   doubleword from the string.  Use that to calculate the length.
	   We need to make sure the null char is *before* the start of the
	   range (since we're going backwards).  */
L(done):
	cntlzd	r0,r10	      /* Count leading zeroes before the match.  */
	srdi	r0,r0,3	      /* Convert leading zeroes to bytes.  */
	add	r9,r8,r0
	sub	r6,r9,r3      /* Length until the match.  */
	cmpld	r9,r7
	bgt	L(end_max)
	mr	r3,r6
	blr

	.align	4
L(zero):
	li	r3,0
	blr

/* Deals with size <= 32.  */
	.align	4
L(small_range):
	cmpldi	r4,0
	beq	L(zero)

	rlwinm	r6,r3,3,26,28 /* Calculate padding.  */
	ld	r12,0(r8)     /* Load word from memory.  */
	cmpb	r10,r12,r0    /* Check for null bytes in DWORD1.  */
	sld	r10,r10,r6
	srd	r10,r10,r6
	cmpldi	cr7,r10,0
	bne	cr7,L(done)

	addi    r9,r8,8
	cmpld	r9,r7
	bge	L(end_max)
	b	L(loop_small)

	.p2align  5
L(loop_small):
	ldu	r12,8(r8)
	cmpb	r10,r12,r0
	addi	r9,r8,8
	cmpldi	cr6,r10,0
	bne	cr6,L(done)
	cmpld	r9,r7
	bge	L(end_max)
	b	L(loop_small)
END (__strnlen)
weak_alias (__strnlen, strnlen)
libc_hidden_builtin_def (strnlen)
